print

LSX 2030 MA

xDSL Line/Loop and Noise Simulator platform

The LSX 2030 is a single hardware platform that can be used as an MA version or as an EP version.
The MA version – Measure & Assure – is the hardware platform dedicated to one Standard or one specific DSL Test Setup. 
Optionally, the fully programmable Arbitrary Noise Impairment Generator (ANG) can be integrated in the system or can be provided as a standalone unit: ANG 2005 or ANG 2030.

ABOUT THE LSX 2030 MA (V)

THE LSX 2030 MA (V) ENABLES SIMULATION OF:

  • Lines and loops according to the selected standards;
  • Insertion loss and line type parameter ranging from 0 dB to max. 198 dB at 1 MHz;
  • Propagation delay conform the selected Standard mentioned in the MA version;
  • Complex impedance of the line in order to enable proper testing of analogue hybrid circuits (Analog Front End) and generation of the proper echo’s according selected standard
  • Sustains up to 400 V DC / 100 mA;
  • Bidirectional operation
  • Voice band passing DC

LINE AND LOOP SETTINGS

LINE CONFIGURATION THROUGH THE USE OF SELECTED LIBRARIES FOR LSX 2030 MA:

  • LSX 2030 MA is based on Standard ITU, ATIS, ETSI, Broadband Forum libraries

LOOP CONFIGURATION THROUGH THE USE OF SELECTED LIBRARIES FOR LSX 2030 MA:

  • LSX 2030 MA is based on Standard ITU, ATIS, ETSI, Broadband Forum loop libraries

ARBITRARY NOISE GENERATOR ANG 2005 / ANG 2030:

  • 2 x 2 Independent and user programmable noise generators and injectors
  • 7 simultaneous noise inputs/sources with NEXT, FEXT, User filters, amplifiers and programmable load per Injector
  • High Impedance Outputs, NT and LT side
  • Common/Differential mode injection in one unit and per injector
  • Crest factor for any combination of noise CF > 5 (programmable)
  • Programmable micro interruptions on both NT and LT side
  • Programmable RFI tones on each port, with variable WGN background noise
  • Internal noise clock/synchronization simultaneous with external TTL-clock input for second clock synchronization
  • External noise input with programmable common mode/differential coupling injection for 50 Ohm
  • Internal noise generator output per port up to 10V with selectable sampling rate up to 3,256 samples per second
  • Graphical output drivers and test report generator
  • Programmable loops, segments, bridge taps for noise injection according all Standards
  • Easy and fast integration into existing automation platforms, with competing line simulators drivers
  • Noise Import Software for customized noise models (PSD or time based) in CSV or DAT format
  • Bandwidth ANG 2005 DC to 4,5 MHz, ANG 2030 DC to 35 MHz