France Telecom - Product Info Request
Dear customer,
Please find below a complete overview of the Sparnex Instruments product portfolio. By selecting the checkbox behind each product, you can select to receive more information, a remote product demonstration or even an on-site evaluation. We appreciate your input and one of our sales representatives will revert back to you on your request(s) at our earliest convenience. Please use the hyperlinks (per product) to provide us your input. Thank you.
Additional Information Request - Remote Demonstration Request - On-Site Evaluation Request.
HARDWARE
LSX 2020
The very first fully programmable bidirectional multi-DSL line simulator in the world. It has a White Noise Generator on board and can be programmed with any line type. The electrical length is 99 db @ 1 MHz and bandwidth is 4,5 MHz. It is a perfect solution to test the maximum performance of DSL to be expected on your very own network since you can program the characteristics of your own cables and noises.
Information Request - Remote Demonstration Request - On-Site Evaluation Request.
LSX 2025.x
This multi-segment loop simulator is based on the same active analog concept like the LSX 2020. Several programmable segments in one system give full flexibility to program bridge taps and different line types in one loop with the intuitive GUI of the Copper Network Builder 2.0. LSX 2025.x is the preferred choice of Network Operators since any loop topology of different line types/bridge taps are programmable.
Combined with the ANG Math 2005 and/or the DSL Test Robot LSM 2005 it will run pre-programmed test suites in a fully automated and 100 % repeatable test setup.
Information Request - Remote Demonstration Request - On-Site Evaluation Request.
LSX 2030
The LSX 2030 is an ‘all-in-one’ physical layer simulation platform. The ultimate solution for any DSL test lab since it is programmable, it has a noise floor beyond what is asked in the Standards for compliance tests, and it can be equipped with one of the 195 application driven Software that allow customers to run any test of which programming can be done just in seconds. LSX 2030 has bridge tap and noise generator on board. It can test voice band modems and POTS as well as ADSL2plus modems with extension to VDSL2 in a frequency band up to 40 MHz.
Information Request - Remote Demonstration Request - On-Site Evaluation Request.
LSX 2030 EP
This is the flagship of the company. It can do any line type, any noise, any standard and any country specific cable as of the extensive library that is available for running one of the 3000 Service Operator or country specific tests on top of the Standards. It is backward compatible with older test benches, and it can clone other DSL loop simulators. A sophisticated self-tuning calibration process guarantees equal results at all times.
Information Request - Remote Demonstration Request - On-Site Evaluation Request.
LSX 2030 MA
The MA version of LSX 2030 is a Compliance and Benchmark tester according to Standards. This soldier for all work is programmed for one Recommendation or one Standard. As such the LSX 2030 MA competes with the conventional passive loop simulators in the market dedicated to run compliance & benchmark tests. Still ‘MA’ can be upgraded to an ‘EP’ version. With the TGA-10 traffic generator, the ASM 525 automatic switch and the DSLAM simulator DMS 192 one can test the Standard in a fully automated way resulting in test reports with a Sparnex Instrument Label that overrules any discussion on test results.
Information Request - Remote Demonstration Request - On-Site Evaluation Request.
LSX 2030 V
The V stands for VDSL. This extension of LSX 2030 allow tests up to 40 MHz under extremely low noise levels of –150 dBm/Hz, superb internal bypass crosstalk characteristics and on-board compensation that guarantees equal results at all times. When splitters are involved one might look to use the LCSV 35 in combination with the LSX 2030 V.
Information Request - Remote Demonstration Request - On-Site Evaluation Request.
MCF 1.0
Nothing better than a cable to simulate a cable. There are drawbacks in using cables for testing DSL technology performance, but sometimes there is no alternative. Some tests require real cable because the (active or passive) electronic simulators will influence the test. One such a test is stressing splitters with extreme high voltage currents as of so-called ring trips of the POTS that saturate coils in splitters and cause modems to retrain. MCF will be used for all tests where real cable is preferred to exclude any effect of the physical layer simulator. The conditioned cables of MCF provides a controllable and repeatable test setup in a lab environment and has increments to approximate the electrical length as close as possible.
Information Request - Remote Demonstration Request - On-Site Evaluation Request.
LCSV 35
When cables are found unpractical there is the LCSV35 that combines best of both worlds: inside there are no coils and thus the perfect solution for labs where splitters should be tested in presence of DSL modems
The LCSV 35 and LSX 2030 form one complete physical layer simulation platform for any xDSL test job.
SFT 127
This test system is designed to certify xDSL Splitters and in-line Filters. It is the first fully automated test system on the market that runs all WT-127 tests with one test setup and in one test campaign.
SFB 1050
This is a programmable and versatile feeding bridge providing all currents for POTS and Splitters tests in presence of DSL. The unit can be used as a standalone, or as part of the integrated SFT 127 test bench.
RCG 1001
This is a programmable Ring Current generator with holding bridge to test Splitters and In-line filters on their robustness against Ring trip in a DSL friendly or unfriendly mode. The RCG 1001 can be used as a standalone, or as part of the integrated SFT 127 test bench.
DLA 100
Passive line simulation module to test DSL up to 1,5 MHz (ADSL, HDSL & ISDN). Any line transmission code can be tested like CAP, 2B1Q, HDB3, DMT, QAM, TC-PAM, FSK or any other coding technique.
DLA 200
Passive line simulation module to test DSL up to 2,5 MHz (ADSL2plus). The DLA 200 is a slim line model that can be used as a standalone module, or as a 19”subrack module for multi-pair tests. This small and handy module is typically used to run Interoperability software tests, as well as performance benchmark testing on homogenous lines.
DLA 200 A
This equivalent product like DLA 200 is equipped with a small processor to allow for remote control in an automated test environment for testing DSL software updates of DSLAM’s, interoperability and production tests. The DLA –S sub-rack that can hold up to 10 channels with universal power supply.
DLA 350
Passive line simulation module to test all DSL technologies up to 30 MHz. The slim line model is a compact small portable unit of only 0,850 kg for all DSL test jobs including all VDSL2 band plans. It is the ideal solution to verify the working of DSL in steps of 50 meter or 150 feet in a reliable and repeatable way.
MLT 24
This multi-channel DSL test device has up to 24 passive line simulations on board that allow for testing
24 DSLAM ports or Modems of any DSL flavour from ISDN up to VDSL2. It is the very first compact multi-channel test system that allow to test all DSL technologies with one and the same system up to 24 simultaneous channels. 32 units can be cascaded in an automated setup. The remote control is standard.
ANG 2005
Sparnex’ Arbitrary Noise Generator is a state of the art, easily programmable and configurable noise generator designed for testing xDSL modems on their noise immunity. Different noise and clock sources, dual injector and ICXACT compatible make one complete system as a standalone or as part of an LSX setup.
ANG 2030
The ANG 2030 is designed for generating noise disturbers in the frequency domain up to 30 MHz. The proved concept of the successful ANG Math 2005 is also the base of ANG Math 2030. The reliable and bug free SW engines of the ANG Math product family makes this noise generator the most versatile and complete Arbitrary Noise Generator of the DSL test market, and with the ICL interface also the fastest one.
LSM 2005
The Sparnex Loop Switching Module is designed to switch copper lines carrying xDSL signals. It is an instrument that automatically configures the required local loop, according to ETSI, ANSI, and ITU standards using LSX 2025 segments or any other simulator of the Sparnex Instruments product family. With LSM/ASM any automation job is easy and fast. Daily comfort with reliable test platforms always up and running is a major benefit of the Sparnex DSL test lab equipped with the LSM/ASM automation gears.
ASM 525
This high-end standalone 19” Automatic Switch connects modems, DSLAM ports and different test systems through a physical layer platform. It is specifically designed for laboratory use in a controlled DSL test environment up to 40 MHz. It has 5 inputs and 5 outputs and 2 simultaneous channels that route the link to any external test instrument, loop simulator, noise generator or any combination of those. The electrical specifications of the ASM 525 guarantee the integrity of the analog signals that pass the switch.
ASM 9696
The ASM 9696 is a modular 96 VDSL2/ADSL2plus switch port system, designed for switching modems to DSLAM ports through a physical layer medium that represents the copper cable infrastructure. High crosstalk separation with low effect on insertion loss of passed signals, keeping up with the impedance of the Device Under Test, the line and noise simulator makes it the switch device for un-debatable laboratory use.
MLT 24 S
This MLT-24 multi-channel passive line simulation can be additionally equipped with a switch for 24 inputs and 24 outputs as well as 2 extra channels to connect external test instruments. Combined with DMS 192 it provides a fast and multi-DSL test center for production purpose or for large modem/DSLAM testing.
DMS 192
The DMS 192 is a proprietary or multi-vendor chipset based DSLAM simulator that replaces the CO when testing CPE’s and Set-Top Boxes for new applications, like i.e. VOIP and IPTV. A cost effective solution for production grade testing and software interop testing up to maximum 4 times 48 parallel DSL CPE’s devices per DSLAM simulation blade.
ICXACT 1.0-2.0
A versatile high-end non-intrusive xDSL analyzer for measuring signals in the analog and digital domain. ICXACT is compact and easy to use instrument for compliance and performance testing in the lab, on-site with customers or for physical layer characterization tasks. As of its compatibility with the programmable line and noise generators of the Sparnex Instruments physical layer platform, it turns the ICXACT into an unique tool for Service Operators and network designers to define deployment rules and test suites.
LINESCOUT C2
This handheld chip independent tester is an user friendly ADSL tester up to ADSL2plus. It tests the DSL link from DSLAM side, or from the MODEM side. The DSL connection can be checked without MODEM or DSLAM when 2 units are connected to the telephone line. It works fast and it is very reliable.
LINESCOUT C30
This handheld DSL link tester is an easy to use chip independent DSL line quality tester that allows to communicate with any DSLAM or any DSL modem for all DSL flavours up to 200 Mbit/s VDSL2. The unit can be programmed as DSLAM or as Modem. It has also an Ethernet port, and allows for V-LAN tagging in PMT or ATM mode. Information like SNR, CRC, FEC, HEC, Power on top of the maximum US and DS speed are standard features. Battery powered it allows for 4 hours testing autonomy. The unit is IP54 protected and can be used by any technician or cable installer without in-depth knowledge of DSL technology.
LINESCOUT DECCA
This multi-channel crosstalk disturber and crosstalk measurement unit can hold up to 20 CXTLK disturbers for NEXT and FEXT simulation and test purposes. The unit is equipped with an analog receiver for testing the presence of analog signals in terms of PSD in each spectrum domain where the DSL technology is active. It can also be combined with MLT 24 or DLA devices.
LINESCOUT COMPACT
This is the equivalent of the Linescout Decca with a capacity of 10 DSL Crosstalk/Noise generators.
SOFTWARE
b-ALTIC
The broadband automated laboratory solution for testing interoperability and compliance to Standards is a test software that allows for automated test report generation based on a fully integrated test solution. Lab managers rely on b-ALTIC to increase the test output with repeatable and reliable results at all times.
ANE - Application Note Enabler
An A-note is a complete software solution for a Standard or Customer Specific Test Scenario of test suite.
ASM - Automated Switch Matrix
The ASM tab under CNI provides the user the capability to switch and hence interconnect different modems with different DSLAM units that are under test. Extensive tests of all combinations of ATU-C/R under a specific standard can be performed with the same test bench setup. ASM can be combined with the PST, TSP, TPC and other automation tools. For this feature, an LSM or ASM unit is part of the test bench setup.
CNB - Copper Network Builder
This SW provides the user with the capability of creating any type of loops or lines based on field input data from the ICXACT or customized to the specific test under study. CNB allows to program and to setup own loop topology, impedance, length, attenuation, resistance, temperature ... per line segment of the loop be it a line or bridge tap. The parameters like i.e. impedance, temperature, etc. can be adjusted individually, without affecting other parameters, offering the unique capability to investigate specific issues.
CNI - Copper Network Builder + Noise Creation Software + Integrated GUI
This SW integrates Copper line settings with Noise browser settings in one Graphical User Interface (GUI). CNI furthermore can be expanded with additional software features and wizards, increasing the automation level of the system, while providing an easy to use interface.
DMS - DSLAM Modem Simulator
A cost effective solution for production grade testing and software interoperability testing up to maximum 48 parallel DSL CPE’s devices per DSLAM simulation blade, and 4 blades per test setup.
ICL - Instrument Command Language
ICL is a control software with possibility to use Automation Scripts. Pre-set scripts that encompass the standards are uploaded into the test bench automatically. The switch between standards on the same test bench is fast and easy. Sparnex Instruments is the only test platform that can run several standards and proprietary performance tests with the same hardware.
ICX - ICXACT
This platform allows the user to import the field data into the lab for specific research purposes. Doing so, performance testing and ranking of the different devices under test will unveil what the best device is for the customer specific environment, next to the conformance testing according to the specific standards.
NBS - Noise Browser Software
NBS provides more than 10.000 noise files which can be manipulated with the Noise Browser Software (level amplitude, repetitive, background noise, etc.)
NCS - Noise Creation Software
The NCS mix-panel allows unlimited noise creation up to a mix of 7 parallel noise sources, different clocks and 4 hardware drivers/output.
NES - Noise Events Suite
This tab under CNI provides the user to setup Noise Events. Settings such as impulse noise and background noise are set to the specific needs of the user, either conform the standards or customized to the network environment. At the touch of a button one can activate and run the test.
NIS - Noise Import Software
NIS is based on ICXACT Spectrum measurements in the field. It allows these captured noises to be used in the lab setup when evaluating ATU-R and or ATU-C equipment. This addition makes the test bench extremely powerful and allows for performance testing to take place prior to equipment selection and roll-out. It also allows designers and equipment vendors to get a clear picture of what is going on in the field.
PRT - Performance Reference Test
Tests performed under PRT are aimed at ranking the DUT according to performance in the customer network, for this purpose the input from the ICX, NIS and other features enhances the PRT ranking for the DUT.
PTS - Pre-configured Test Scenario
The pre-defined tests allow the user to quickly identify and upload the necessary data into the test bench, reducing human interaction and possibility for human error. Once the PTS is uploaded, the user still has the freedom to modify the loop parameters and adjusting the injected noise settings.
TPC - Test Profile Configurator
This wizard type configurator allows for the user to be guided through the standards and different test scenario’s, to end up with a complete test scenario according to the profile of the Device Under Test.
TRG - Test Report Generator
The TRG is a useful tool for generating automated reports, providing an overview of the standards, the loops used for testing as well as the results from the test. A wizard is available to setup the report according to the users’ specifications, keeping in mind the standard or customized settings of the test bench.
TSP - Test Scenario Programmer
This SW programmer provides the capability for the user to save the setup he created as a Pre-defined Test Scenario, or to pr